Jims Billet Big Axle Tappet Block Kits - Polished

Jims Billet Big Axle Tappet Block Kits - Polished

€1.508,25
Ga direct naar de productinformatie
Jims Billet Big Axle Tappet Block Kits - Polished

Jims Billet Big Axle Tappet Block Kits - Polished

€1.508,25

Op bestellingWe laten je de levertijd weten.

Big Axle tappet block kit, polished

Artikelnummer
ZOD-235988

Twijfel je of dit past? Bel de werkplaats op 0182 60 35 93 of laat het monteren in Polsbroek.

Afhalen is mogelijk op Blue Bull

Meestal klaar binnen 24 uur

Winkelgegevens bekijken

Jims Billet Big Axle Tappet Block Kits - Polished

Blue Bull

Afhalen mogelijk, meestal klaar binnen 24 uur

Dorp 50
3415 PG Polsbroek
Nederland

  • Advies van onze eigen monteursVraag het gerust, we denken met je mee.
  • Laten monterenIn onze werkplaats in Polsbroek.
  • Afhalen in PolsbroekHaal je bestelling op bij de werkplaats.

Productinformatie

Uitvoering: Big Axle tappet block kit, polished

These tappet kits for Panhead and Shovelhead motors are capable of the highest RPM a Harley can safely run at a valve lift of up to .700" in combination with the right valve springs, valves and cam. The use of these hydraulic tappets enables Panhead and Shovelhead motors to have all the hydraulic benefits of the late Evolution style hydraulic system, as they will eliminate the total oil loss of the old style hydraulic units. The billet tappet blocks are made from 7075-T651 with a tensile strength of 83,000 psi which is almost triple the amount of cast tappet blocks. Fits Panhead 1953-1964 and Shovelhead 1965-1984. Do not use the early tapered 1/4"-24 screws on these blocks unless you provide a counter sunk for that style screws. 

Note:
These blocks are designed to accommodate a gross valve lift of .550" at the valves. This is about .350" at the tappets, leaving a clearance of .035" roller to block free play. If used with higher lift cams tappets must be modified. Use with standard pushrods or equivalent to standard pushrods.

Ook interessant voor je motor