Feuling, Reaper M8 538 camshaft

Feuling, Reaper M8 538 camshaft

€440,46
Ga direct naar de productinformatie
Feuling, Reaper M8 538 camshaft

Feuling, Reaper M8 538 camshaft

€440,46

Op bestellingWe laten je de levertijd weten.

Artikelnummer
MCS-707544

Twijfel je of dit past? Bel de werkplaats op 0182 60 35 93 of laat het monteren in Polsbroek.

Afhalen is mogelijk op Blue Bull

Meestal klaar binnen 24 uur

Winkelgegevens bekijken

Feuling, Reaper M8 538 camshaft

Blue Bull

Afhalen mogelijk, meestal klaar binnen 24 uur

Dorp 50
3415 PG Polsbroek
Nederland

  • Advies van onze eigen monteursVraag het gerust, we denken met je mee.
  • Laten monterenIn onze werkplaats in Polsbroek.
  • Afhalen in PolsbroekHaal je bestelling op bij de werkplaats.

Productinformatie

Past op: 18-26 Softail; 17-26 FLT/Touring (excl. 23-26 VVT); 17-26 Trikes

Chain drive.
538 CAM - Aggressive camshaft with a "nasty" sound. This camshaft revs up fast and pulls hard in engines with big bore cylinders, modified cylinder heads, intake, compression and exhaust. The REAPER 538 grind will shine in 124" and larger cubic inch engines with added compression ratio. Ported cylinder heads are not required but will complement the cam and add even more pulling power throughout the range. The stock throttle body produces an excellent powerband and use of a high flow throttle body will increase peak power numbers. A high flow exhaust system and air cleaner is highly recommended for optimal performance. FEULING recommends matching this cam with our RACE SERIES oiling system.

NOTE: High Lift valve springs are required on stock cylinder heads, see FEULING BEEHIVE valve spring kit 993530 or 588021. SE cylinder heads have high lift valve springs but will need to be verified. Heavy Duty one piece pushrods are also highly recommended see 993528.


RPM range 2,350 - 5,975. Grind: 538

..................Valve Lift Open Close Duration @ 50" lift @ TDC Lobe Centerline
Intake .538 20.5 BTDC 38.5 ABDC 239 .180 99
Exhaust .542 48 BBDC 18 ATDC 246 .157 105
Overlap: 38

*Cam specs measured in the engine on the lifter @ 0.050" using a 1.61 rocker arm ratio

Ook interessant voor je motor